Yes. Our undercarpet heaters are made with a spirally designed element encased in an aluminium foil earth shield which is extremely flexible and robust. Spreading heat evenly and therefore withstands heavy traffic, eliminates the risk of electric shock and overheating. Our heaters are designed to run continuously and are completely waterproof. We put all our heaters through a safety test before packaging. Our undertile wire is put through a series of in house tests before it is even put into our production line.
Yes, if they are installed incorrectly.
Refer point 1 above.
Yes, if they are installed incorrectly.
Yes, if they are installed incorrectly.
Warmup heaters will be tested shortly for EMR effects.
The heater is designed to trip the circuit breaker in your home.
No, doing so will cause our heaters to over heat and can actually cause a fire.
Go to the Undertile heating section.
Undercarpet heaters can be fitted yourself if it is under loose lay rugs. As for Undertile, go to the Undertile heating section.
We charge + - R1400 per kilowatt and in order to know what kilowatts you require I need the square meterage of your room. Making sure you have measured from wall to wall (including cupboard space). We will then take that square meterage and multiply it by 80 watts if you have a standard room size. If you have a room with large windows and high ceiling volume we suggest working with 100 watts per square meter. This will then give you a figure of the watts you require in order to heat your room sufficiently E.g. 25 square meters x 80 watts = 2000 watts required divided by 1000 = 2 kilowatts required x R1400 = R2800 inc instillation and a basic thermostat. But we do not install. We work through heating specialists who are fully trained by us. I will give you contact details or take your details for a heating specialist we recommend you make use of in your area.
No, it is by far more economical to run compared to other heating methods and the quality of heat received by our heaters is superior to that of most conventional heating methods. EG, Bar heaters, wall panel heaters and oil heaters.
This depends on what you are currently paying for electricity * An example of the formulae for this is as follows -: UC250 = 250W DIVIDED BY 1000 = 0.25KW x 40c = 0.10c per hour.
Floor heating warms your entire room from the floor up and other forms of heating heat only the area around it.
Yes, our heaters will raise the ambient room temperature by at least 10 to 12 degrees.
We use foil so that the heat is evenly distributed.
It is cost saving because the heater will turn off once it has reached the desired temperature.
We would first establish what your requirements would be before recommend a thermostat. Questions we would ask: Is the thermostat to fit into a 100mm x 100mm (4 x 4) or 50mm x 100mm (2 x 4) wall box or is the thermostat to be surface mounted next to a wall socket outlet. Would you prefer a programmable (SET and FORGET) or manually operated electronic thermostat. * For heating pads that need to be plugged straight into a socket outlet we would recommend Warmup's electronic plug-in thermostat.
We have a variety of non-programmable and programmable thermostats. Visit our Thermostat page to see the complete range.
A programmable thermostat has the ability to control both temperature and time.
Yes, a thermostat is choice. Although it is cost effective.
It is a personal choice, you may use turn the heaters on and off as you would like or you may choose to have a programmable thermostat that will provide warmth when you need it. This method of control is the most economical.
No more than 35 degrees with out a thermostat, but it is influenced by surrounding factors.
The carpet fitter should replace the damaged unit so that the end user is not "put out", we in turn will repair the unit if this is possible, depending on the extent of the damage.
We guarantee that our heaters are fully operational and safe when they leave our factory.
Our warranty is for 5 years, if anything may go wrong with the heater that is proved to be because of a factory fault then we will replace the heater at no charge.
We are still able to find out if the heater is under warranty by looking at the rating plate on the heater which will always have a manufactured date on it.
We would like our undercarpet heaters to be registered and your information is important to us.
The installer is responsible to come out and see what the problem is and if he is unable to find the fault he will contact our technical team and we will take it to finish.
As long as the heaters are under guarantee, Warmup will take care of you.
Our voltage is lower than last year.
Damage to only that one section of the pad has been caused by a knee kicker etc.
Not difficult at all.
Yes, as long as the heater can breathe.
At least 30cm from the edge.
Yes, our heaters are completely waterproof.
All except under rubber backed carpets.
Yes, we can join units as long as they do not exceed 3000 watts.
They are 6m in length on our small sized units and are 8m in length on our bigger units.
No, doing so will cause our heaters to over heat.
No, our heaters are not designed to be fitted under tiles. They will not be able to breath and will therefore overheat.
Yes, as long as the heater is slightly smaller than the rug and it must be put on top of under felt.
Yes, but we suggest taping the unit down because you might put a nail through the element and damage the heater.
We use no less than 1000 grams of felt. 50. Can chip foam be used - No, the heater will cause it to dry out and flake away.
Yes, but be sure to let your carpets dry naturally. Using the heater to dry your carpets will cause discoloration.
Yes as long as the heaters can breath.
Our heaters have a life span of more than 20 years.
Warmup Heating Systems was established in South Africa 1984.
It all depends on the extent of the damage.
No, doing so causes damage to the elements and will cause the heater to over heat.
Installation costs are included in the kilowatt pricing.
We have a variety of sizes. From UCS070 (= 70 WATTS) to a UCW2000 (= 2000 WATTS).
We have agents through out South Africa, and there is an approved installer in your area.
Unfortunately not. We are the manufacturer and national sales and marketing office for South Africa.
Nothing our heaters are waterproof.
They are SABS tested but there is no standard for them to be SABS approved.
Yes.
Yes - Our Irish plant manufactures our wire.
No, it must be able to handle the wattage of the unit.
Extreme amounts.
Yes, as long as there is an underlay, no less than 1000 grams.